S06U – High Precision Positioning GPS Tracker
SEEWORLD S06U vehicle GPS tracker not only supports satellite positioning,but also supports single base station and multi-base station positioning.
Built-in high sensitivity GPS and GSM antenna,supports real-time tracking,history playback, blind zone re-recording,oil cut-off,overspeed alarm,fence alarm,mileage statistics,ACC detection,power failure alarm,etc.,currently it is hot sales for our company.
GEO fence alarm:Set fence alarms with SMS commands to provide a safety net for your vehicle or other assets.
Remote oil cut:The system sends a power-off command, and the relay disconnects the power of the ignition device to achieve vehicle stall.
ACC detection:The vehicle is connected to the ACC line and users can view the vehicle status on the system. ACC on, on behalf of vehicle ignition, ACC off, on behalf of the vehicle stall.
Overspeed alarm:When the speed of the vehicle exceeds the overspeed speed value set by the platform, the overspeed alarm is triggered, and the device will send an alarm signal to the GPS monitoring platform.
Power Off alarm:If the GPS Tracker encounters a forced damage, such as cutting a cable, the locator will push an alarm message for the power failure alarm to the system.
Vibration alarm:After the device enters the armed mode,the device detects the vehicle vibration,triggers the vibration alarm and sends an alarm signal to the GPS monitoring platform.
Remote listening:Send the SMS code to the mobile phone number bound to the device, and the device can be pulled back to enable remote listening.
SOS alarm:As long as you press the button,the SOS alarm will be triggered,and the alarm signal will be sent to the GPS monitoring background.
|Dimensions||9.8 × 5.2 × 1.5 cm|
SIRF Star III
Class 12,TCP/IP build in GSM Module
|Support input voltage range||
Avg.hot start ≤1s ; Avg.cold start ≤30s
-20℃ ~ +70℃
|Data storage quantity||
|Voltage input range||
Installing the device:
1. Connect according wires to your car by referring to Wiring Diagram.
2.Install the device in following three suggested place
A. Make it covert for security factors.
B.Keep away from high power electrical devices, such as reversing radar,anti-theft device or other vehicle communication equipment which may affect the device signal.
C .Keep the device front face up & No metallic cases above the devicewhich may affect signal as well. Such as the windshield which is pasted with metalthermal-protective coating or heating coating.