About this low-cost commercial vehicle GPS tracker:
SEEWORLD R11 is a 2G multi-functional positioning terminal, supporting GPS + BeiDou + LBS + WiFi (optional) positioning. In addition to the basic functions, such as support for ACC detection, engine/oil cut-off control and vibration alarm, the R11’s biggest highlight is that it supports driving behavior analysis, with built-in 10-level adjustable vibration sensor sensitivity, which supports rapid acceleration, rapid deceleration, sharp turn alarm, and statistical analysis. It also supports automatic recovery when the device is abnormal.
R11 is a professional lightweight GPS tracker for commercial cars that uses GPS networks to provide 24-hour vehicle monitoring on the road and in parking lots.
This commercial vehicle GPS tracking device with remote engine/oil cut-off is suitable for auto finance, fleet management leasing, mortgage, transport, forwarding companies, employee monitoring, security of antique vehicles, and construction vehicle monitoring.
Features of this R11 fleet management GPS tracker:
| GSM RF chip | HS8269 |
|---|---|
| GSM channel | 850/900/1800/1900MHz |
| GPRS class | Class 12,TCP/IP |
| Communication protocol | TCP |
| Body memory | 4MB |
| Phase error | <10° |
| Maximum output | 32±3dBm |
| Maximum frequency error | ±0.1ppm |
| GPS chipset | AT6558R |
| Positioning mode | GPS+BDS+LBS+Wifi (Optional) |
| Frequency | L1,1575.42Mhz C/A code |
| Number of channels | 72 |
| Positioning accuracy | <10 meters |
| Tracking sensitivity | -162dBm |
| Capture sensitivity | -148dBm |
| Positioning time | Avg.hot start <2s |
| Device agreement | GTO6/GTO6N |
| Operating voltage range | 9-90V |
| Working current | 25mA/12V |
| Quiescent current | 2.5mA |
| Battery | 100mA |
| Continuous working time | 40minute |
| Continuous stationary battery life | 24Hour |
| Storage capacity of blind spot track points | 400 |
| Operating temperature | -30℃～+80℃ |
| Working humidity | 35%~80% |
| Dimensions | L80mm*W28mm*H14mm |
| Waterproof and dustproof grade | IP65 |
Owners can use ACC detection to see if their vehicle has ignition
The device supports rapid acceleration, rapid deceleration, sharp turn alarm and statistical analysis.
Owner can remotely control the vehicle by disconnecting the engine remotely.
With built-in vibration sensor, an alarm will be sent immediately when the vehicle has abnormal vibration.
Alerts immediately when the vehicle is in a low battery condition.
Owners can customize the division of the electronic fence, and when the vehicle drives into or out of the electronic fence, the locator will immediately alarm.
